AKA MFD 30 CM AND 45 CM COIL

AKA MFD 30 CM AND 45 CM COIL

An analog, computerized, high-precision, multi-frequency metal detector with an original, patented, space harmonic filtering (sft) feature that significantly improves the quality of identifying objects. 

Features: 

- An electronic unit that allows the processing of transmission and signals in the range of 1 to 30 kHz. 

- Automatic compensator input allows to reach 65 cm for sensitivity of 25 mm. coin (with dial coil 10 " GG / 7KHz) 

- a unique algorithm for identifying flat metal objects (s algorithms)  

- Large high-contrast display 

images of the graphic LCD screen - technology for immediate visualization of objects during a search in spectral form - (128x64)

- Search two independent channels: RT (Real time) and ST (short tone)) 

- 4 user programs on demand with instant access 

- ability to adjust volume and volume limits volume indicator 4 modes

- An additional program for deep searching of large objects

- Floor balance automatic and manual 

a system for automatic correction of ground balance with adjustable speed rearrangement - 

search dynamic and static modes - 

- Unique algorithm to demonstrate discriminatory suppression and "hot rocks"  

- "Turbo" mode for extreme depth 

Aerodynamic ergonomic design - 

- Waterproof housing electronic control module 

- possibility of rapid operational change search coils in the field without memory 

- Powered - 6 batteries 1.5 V AA 

- Time to work with the battery set-up to 20 hours, depending on the modes. 

- Weight without battery-1.3 kg. 

Additional search coils:

- 6 " / 14KHz 

- 6 " x10 " - 7KHz or 14KHz or 19kHz 

- 9 " x12 " - 7KHz or 14KHz

- 11.5 inches / 7 kHz and 14 kHz

- 13 " - 3kHz or 7KHz 

- 15 " - 3kHz

- 18 " / 3kHz

The original feature of this detector, and all other models of the AKA, is the "hodograph" identification of targets, which allows for very easy and precise identification of targets. No metal detector brand has such a designation. 

There are 3 algorithms to choose from; the algorithms are defined as 3 chips that control the detector in different ways based on the speed of recovery and the desired targets. 

MSF, SSF and MM 3 are each named parameters of the algorithm; for example, if you are using mm mode with high cop and very fast recovery rate discrimination, sensitivity, tone of voice, such as the ability to save all settings, when using another algorithm such as SSF, a different adjustment range, you can save the search to suit your needs. 

SSF is primarily used in areas with large flat-moored or over-rusted iron plates, these are often detected with mixed signals or often mixed as a non-ferrous signal. 

When using the SSF algorithm, these errors should be avoided, with the machine clearly identifying that the detected signal is iron. 

MSF is a multifaceted setting, with a moderate improvement rate that easily rejects or identifies most recovery irons; this is best described as a low-to-moderate garbage setting that will suit most people. 

MM is also known as metal litter (MT), is very dynamic and an ideal environment for high iron contamination such as ancient sites, a slow scanning speed is recommended for MM mode as the audible response is very sharp and precise.

S-shafted Signum MFD:

Russian - English language the latest version of the software comes with a menu option: