Aka Mfd Hm

AKA Signum MFD is the new high-performance professional metal detector, a device that can exceed the performance of the best two-plate depth detectors, but also has metal and size identification. Added new adjustments and filters for maximum search efficiency and stability. A multifunctional instrumentation that can quickly switch from a small valuables detector to a very powerful depth machine with just the push of a button.

The Signum MFD not only detects small targets with maximum performance, it can also be converted into powerful depth instrumentation using large coils, for example 15" DD (not for sale) you can search for large masses of ferrous metal and non-ferrous superficial metallic debris. Also on tall grassy terrains ideal for searching, no problem, search on it......

For deep search, as in the video, the sweep mode is reduced to approximately 4 seconds, varying between 20 and 100 cm, depending on the search coil used. A standard height for this type of survey is about 65 cm above the ground.

With the audio response and hodograph loop, you'll have a precise indication of the metal detected before you even dig.

Some of the features that distinguish Signum MFD from others are:

The program is N.4 Deep program, it can be activated by pressing the N / PRG button. The Deep program is designed to deeply locate and identify large objects even under a carpet of small scrap metals such as (10" / 9.5" x 12.5") coils (eg: rusty nails and small superficial iron) and up to (13" and 15") The Deep program is a real alternative to depth metal detectors such as White's TM808, Pulse Star II, Garrett GTI 2500 for platelets etc. or home iron Signum MFD with good signal strength can be turned into a powerful deep search unit and back to VLF mode with one click This can be useful when you need to check a detection.

Minor software update:

RT-M99 Additional Sound Mode (Multi-Tone)

Frequency shift by resonance can be realized within 10% above the coil frequency. Signum's sharpness is reduced, but the detector becomes less susceptible to interference (EMI). Works best on mineralized soils, sites with high metallic contamination.

The ST duration can be set differently in each preset.

Volume RT now has 9 points (while Signum is in MFderano 4).

RT setting can be adjusted differently for each preset

The GS filter has an angle of 0.25 degrees instead of 1 pitch as in the Signum MFT. Each preset will have its own setting

Ground Balance has a 0.5 degree pitch.

"Ground region segment", This option decrements the ST in the selected region. Each preset will have its own setting. Signum MFD will work with less false signals (signals near ground zone), very deep targets will be lost. Each preset will have its own setting

The backlight can be turned on and off by long pressing the "Volume" button.

Economy mode can be set differently for each preset, hold down the "-" key.

Advantages of this Deep program: Actually it is a multifunctional detector; The 2 detector in 1 is the usual powerful VLF with small coils and standard programs, but with a large coil and Deep program, it works as deep as a good pulse induction detector, but has the following advantages:

Much clearer identification than a PI or TR detector.

Lightweight and easy to use and again by one person.

Iron is well suited for locating deeper targets in areas contaminated with high mineralization or tall grass.

It saves you the cost of purchasing depth detector with cot .......

There are no harmful emissions from induction pulses that are VLF.

Standard equipment of Signum MFD HM:

11.5”DD 14 kHz search coil

6 alkaline 1.5V AA batteries