English 
Arabic 
Türkçe 
FUNCTION
LORENZ DEEPMAX Z1 is based on the stationary Pulse GBS (Pulse Ground Balancing System = Vibrating Ground Setting System) system. Short and violent magnetic vibrations are emitted primarily through the search coil. These magnetic vibrations create eddy currents primarily in metal-type conductive materials. Said eddy currents will be preserved in the metal object and will disappear when the magnetic vibration emitted by the coil ends.It is possible to detect these eddy currents since the delayed detection phase takes place through the same detection head (now acting as a receiver). Very complex electronic circuits are required to detect these small voltage changes and to separate these special signals from interference. This signal must be powered by a voltage-controlled oscillator (VCO) to have a sound stage, i.e., when a metal appears near the detection area of the VCO header, it sends a signal through the headset or the internal speaker. The eddy currents produced in the metal object through primary soil vibrations will disappear at different times depending on the conductivity of the metal object. For this reason, the classification circuit gives noticeable delays in reading the eddy currents received during the unit period. In addition, With the Double D hood, detection is possible for any metal or non-metal mine. This gives more information about the possible type of matter, moreover, thanks to the emitted sound, it makes it easy to locate and size the buried metal object.
ADVANTAGES
The Pulse GBS system, in principle, has the advantages of using a large diameter head and high transmission power. These are especially necessary for deep fixings. Wired heads of different sizes and shapes attached to the frame can be connected to the LORENZ DEEPMAX Z1 without any adjustment. A special adaptation circuit was added to the detector, which will automatically adapt with different coil systems. This provides extraordinary depth capability when connected with any head. When the diameter of the searchcoil becomes larger, the sensitivity to large objects will increase. At the same time, smaller objects will be able to be detected with less precision. This feature is preferred for detecting large objects and ignoring small objects. Large titles offer high range detection.
With the LORENZ DEEPMAX Z1, objects of almost the same depth can be detected in almost all soil types or "air tests". The high sensitivity of DEEPMAX Z1 to non-ferrous metals such as gold, silver and copper makes the device superior for new target analysis and many different detection purposes. The DEEPMAX Z1 gives a visual (LCD) display signal for each mineral detected. The detector gives the number 000-099 depending on the delay caused by reading and accordingly the mine Classified. The target classification circuit is affected in some cases by the size of the metal object, so it can identify small coins as large pieces of mine. LORENZ DEEPMAX Z1 also offers target analysis for more sophisticated and refined iron and other non-ferrous mines with 26 cm and 35 cm DD caps in harsh soil conditions. The detector also emits an audible warning via headphones or speakers. According to depth determination tests (air tests), the results are almost the same for many types of soil, and therefore significantly higher probability results than standard vibration induction (Pulse Induction) or sine wave type VLF-TR detectors.
APPS
DEEPMAX Z1 was developed for professional fastening and fastening applications.
Many different detection coils can be connected to this metal detector. Large areas can be efficiently scanned with frame heads. Saltwater, different soil types or changes in air temperature can little affect the detection range of the DEEPMAX Z1. You can parse nails or foil-type unwanted objects or introduce them as unwanted small objects, so you can focus on larger and deeper objects. When DEEPMAX Z1 is connected with small detection heads, it is an excellent tool for detecting small objects located deep inside.
LORENZ DEEPMAX Z1 detector set (standard)
DEEPMAX Z1 main unit, carrying case, rechargeable external NiMH battery 12V9.5Ah, shoulder-belt strap, quick charger (100-240VAC), Euro AC- mains cable, earphone, user manual, carrying strap and bag 1m x 35cm double D header with 1m frame header and 3 pieces of telescopic S-pole .
Detection Depths
Mine type /
fixing head
35 cm
DD nozzle
45 cm
hood
1 x 1 m double
frame square
head
1.5 x 1.5 m pair
frame square
header
Gold ingot
diameter = 0.5 cm
28 cm
30 cm(X)
X
X
Silver
print = 2.5 cm
50 cm
55 cm
50 cm (X)
X
Brass plate
10 x 10 cm
100 cm
110 cm
145 cm
170 cm
Tin Can (Cola etc.)
0.33 l
120 cm
130 cm
165 cm
200 cm
Iron box
30 x 18 x 15 cm
170 cm
200 cm
280 cm
340 cm
Manufacturer Company data.
X: Out of searchcoil range
Detection depths were recorded using air medium;
DELAY4/GND4, SENS5
Detection depths may differ depending on different ground or delay detection settings. Larger metal objects can be expected to detect much higher depths.
Sold as optional accessories
Lorenz Z1 Data Logger Surfer 11 software is a feature of the Lorenz Z1 series only.After the field data has been collected, Surfer 11 software easily and accurately converts the data stored on the USB Stick to color maps, contour, surface, image or vector maps on the computer. Therefore, an additional Scripter Software automatically creates twelve maps in each area, six two-dimensional and six three-dimensional. Thus, the operator can choose between different separation and mapping methods. The new Data Logger Hardware and Software developed by Lorenz Detecting Systems is primarily easy-to-use, highly sensitive and economical. With just a few control knobs, Lorenz Z1 becomes enjoyable for both beginners and professionals like engineers, geologists, archaeologists, scientists, and many others. For functions, the operator is not confused.
| Shipping Cost |
|
| Delivery Time | Ready to ship in 1 Business Day |
| Shop Location | Istanbul, Turkey |
No comments found for this product. Be the first to comment!